■This model is to press the various kinds of granular materials into the form of a tablet, with the most outstanding advantage of being able to produce irregular tablets with widely different geometrical shapes, such as double layer tablets, ring like tablets and double side engraved tablets. A total of 23 units of punch consisting of two detachable sections. One cycle of the rotation, produces 23 tablets.
■This model is in compliance with the GMP standard on the production and management of the pharmaceuticals. The compression compartment is entirely separated from the driving mechanisms, with no painting inside the compression compartment. All spare parts to be in contact with the pharmaceuticals are made of stainless steel or with the surface being treated specially for non-toxicity and corrosion proof. The compression compartment is enclosed with transparent glass to prevent contamination. The compression area can be accessed from the four sides, with all surfaces being smooth and easy to clean. ZPW23 Rotary Tablets Press is equipped with continuous and centralized lubrication system for the driving system, tracks and main frictional parts to be adequately lubricated to reduce the noise and wearing for maintenance cost to be greatly reduced.
■ The electric control part adopts the PLC(Programmable Logic Control), with the functions of setting up of the main compression and main compression and main compression overload stop. This machine is provided with the function of auto diagnosis of defectives. Through the display, the defective position can be traced and located rapidly, to increase the efficiency of maintenance.